全部答案

2017-07-25 18:33:05

•   ADSL配置静态IP的配置参考
  Current Configuration:
  !
  version 12。1
  service timestamps debug uptime
  service timestamps log uptime
  !
  hostname 827
  !
  ip subnet-zero
  no ip domain-lookup
  !
  bridge irb
  !
  interface Ethernet0
  ip address 192。
    168。0。254 255。255。255。0
  ip nat inside
  !--- This is the inside local IP address and it's a private IP address。
  !
  interface ATM0
  no ip address
  no atm ilmi-keepalive
  pvc 0/35
  encapsulation aal5snap
  !
  bundle-enable
  dsl operating-mode auto
  bridge-group 1
  !
  interface BVI1
  ip address 171。
    68。1。1 255。255。255。240
  ip nat outside
  !--- This is the inside global IP address。
  !--- This is your public IP address and it is provided to you by your ISP。
    
  !
  ip nat inside source list 1 interface BVI1 overload
  !--- This statement makes the router perform PAT for all the
  !--- End Stations behind the Ethernet interface that are using
  !--- private IP addresses defined in access list #1。
    
  ip nat inside source static tcp 192。168。0。5 80 171。68。1。1 80 extendable
  !--- This statement performs the static address translation for the Web server。
    
  !--- With this statement, users trying to reach 171。68。1。1 port 80 (www) will be
  !--- automatically redirected to 192。
    168。0。5 port 80 (www), which in this case
  !--- is the Web server。
  ip classless
  ip route 0。0。0。0 0。0。0。0 171。68。1。254
  !--- IP address 171。
    68。1。254 is the next hop IP address, also
  !--- called the default gateway。
  !--- Your ISP can tell you what IP address to configure as the next hop address。
    
  !
  access-list 1 permit 192。168。0。0 0。0。0。255
  !--- This access list defines the private network
  !--- that will be network address translated。
    
  bridge 1 protocol ieee
  bridge 1 route ip
  !
  end
  编辑推荐：
  lias在CiscoPIX防火墙中的用法
  Cisco路由器上用软件配置pppoe拨号
  路由器安全配置指南。

  全部
  

  吴***

  2017-07-25 18:33:05

  44 2 评论

  分享
  提交评论